PROMASEAL^® Bulkhead Sealer System is made from high density mineral wool. The mineral wool is coated with PROMASEAL^® Bulkhead Sealer, which will remain in place during a fire and form a barrier against fire. It can be used in wall and floor applications and has been tested up 2 hours to AS 1530: Part 4 and BS 476: Part 20 with various services penetrating the compartment wall.

Go to Top

PROMASTOP^® cement is a fire resistant, light weight cement supplied as a pre-mixed dry powder for mixing on site with water. The system will look white in colour for ease of identification and provides up to 4 hour fire rating in masonary or concrete block walls and concrete floors when installed. INSULATION on the penetrating services will vary depending upon the services that penetrate the barrier. PROMASTOP^® Cement is fire tested to BS 476:Part 20 and AS 1530: Part 4, with reference to prEN 1366: Part 3: 1999..

Go to Top

PROMASEAL^® Fire Pillows  is compressive fire-stopping pillows made from quality cloth envelopes, enclosing a high temperature fire resistant granulated material. It is simple to install, re-usable and maintenance free. In the event of fire, the pillows will remain in place and form a fire barrier by charring and creating a solid mass of insulating material.  PROMASEAL^® Fire Pillows have been successfully tested and assessed by independent laboratories to meet the requirements of BS 476: Part 20: 1987, AS 4072 and prEN 1366: Part 3 for 180 minutes fire rating.
Delivered in 3 sizes:

Go to Top

PROMASEAL^® Acrylic, intumescent or silicone based material with excellent adhesive properties for fire resistant sealing of joints and service penetrations for up to 4 hours FRL when tested to AS 1530: Part 4, AS 4072: Part 1 and BS 476: Part 20. It bonds to dust-free masonry, concrete, calcium silicate board, plasterboard, metal and cable coverings and remains flexible after curing to accommodate thermal movement. Supplied in 300ml cartridge, 600ml sausage or 10L bucket.

Go to Top